BMCVH - ZN DUST ENA PIG F-102, HPA085

  • MSDS: BMCVH
  • Manufacturer: INTERNATIONAL PAINT CO INC
  • Product Name: ZN DUST ENA PIG F-102, HPA085
  • National Stock Number: 8010-00N026128
Product Identification

Product ID:ZN DUST ENA PIG F-102, HPA085
MSDS Date:06/07/1988
FSC:8010
NIIN:00N026128
MSDS Number: BMCVH

Responsible Party
INTERNATIONAL PAINT CO INC
2270 MORRIS AVE
UNION, NJ 07083-5704
US

Emergency Phone: 713-682-1711

Info Phone: 713-682-1711; 800-223-0154

Cage: 26351

Contractor
INTERNATIONAL PAINT INC
HOUSTON, TX 77091 US

Telephone: 800-589-1267/800-854-6813

Cage: 26351

Ingredients

ZINC

CAS: 7440-66-6

RTECS: ZG8600000

Fraction By Weight: 95-100%

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:NONE KNOWN UNLESS OTHERWISE NOTED.
EYES/SKIN/INHAL: MAY CAUSE IRRITATION. INGEST: MAY CAUSE
GASTRO-INTESTINAL IRRITATION.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:SKIN AND RESPIRATORY CONDITIONS.

First Aid

First Aid:EYES: FLUSH IMMEDIATELY W/COPIOUS QUANTITIES OF WATER FOR A
MINIMUM OF 15 MINUTES. GET MEDICAL ATTENTION IMMEDIATELY. SKIN:
REMOVE CONTAMINATED CLOTHING. WASH W/PLENTY OF SOAP & WATER.
LAUNDER CLOTHES BEFORE REUSE. INHAL: REMOVE TO FRESH AIR. GET
MEDICAL ATTENTION IMMEDIATELY. INGEST: CALL MD IMMEDIATELY .

Fire Fighting

Flash Point Method:SCC
Flash Point:100F,38C
Extinguishing Media:FOAM, CO*2, DRY CHEMICAL.
Fire Fighting Procedures:SMOTHER FLAMES W/ONE OF THE ABOVE EXTING
MEDIA. CLOSED CONTRS MAY EXPLODE WHEN EXPOSED TO EXTREME HEAT. WEAR
NIOSH/MSHA APPRVD SCBA & FULL PROT EQUIP .
Unusual Fire/Explosion Hazard:DRY ZINC DUST FORMS EXPLOS MIX W/AIR. MAY
YIELD EXPLOS HYDROGEN GAS IN PRESENCE OF MOISTURE/ALKALI/ ACID.
EXPLOS MAY OCCUR IF CONTAMD W/STRONG OXIDIZING AGENTS.

Accidental Release

Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION. AVOID
INHALATION OF VAPORS. VENTILATE AREA. CLEAN UP WITH ABSORBANT
MATERIALS.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:STORE IN BLDG DESIGNED/PROT FOR
STORAGE OF CLASS II FLAMMABLE POWDERS. AVOID BRTHG DUST OR CHIPS
FROM SANDING OR BLASTING SURFACES COATED W/THIS PROD.
Other Precautions:INHALATION OF ZINC FUME MAY PRODUCE SYMPTOMS KNOWN AS
METAL FEVER. SYMPTOMS USUALLY DISAPPEAR WITHIN 24HRS.

Exposure Controls

Respiratory Protection:IN OUTDOOR/OPEN AREAS W/UNRESTRICTED VENT, USE
NIOSH/MSHA APPRVD FILTER RESPIRATOR TO REMOVE SOLID AIRBORNE
PARTICLES OF OVERSPRAY DURING SPRAY APPLICATION. IN RESTRICTED VENT
AREAS, USE NIOSH/MSHA AP PRVD RESPIRATOR I/A/W 29CFR (SUPP DATA)
Ventilation:PROVIDE SUFFICIENT VENT IN VOL/PATTERN TO KEEP TLV/LEL OF
HAZ INGREDS BELOW LIMITS, & TO REMOVE DECOMP PRODS (SUPP DATA)
Protective Gloves:WEAR CHEMICAL RESISTANT GLOVES.
Eye Protection:CHEM WORK GOGG/FULL LENGTH FACESHIELD.
Other Protective Equipment:WEAR APPROPRIATE IMPERVIOUS PROTECTIVE
CLOTHING TO PREVENT SKIN CONTACT.
Work Hygienic Practices:REMOVE AND WASH SOILED CLOTHING BEFORE REUSE.
WASH HANDS BEFORE EATING OR SMOKING.
Supplemental Safety and Health
RESP PROT: 1910.134 TO REMOVE A COMBINATION OF PARTICULATES AND VAPORS.
VENT: DURING WELDING OR FLAME CUTTING ON SURFACES COATED W/THIS
PRODUCT.

Chemical Properties

HCC:N1
Vapor Density:HVR/AIR
Spec Gravity:6.96
Evaporation Rate & Reference:SLOWER THAN ETHER
Appearance and Odor:NONE SPECIFIED BY MANUFACTURER.
Percent Volatiles by Volume:0(WT)

Stability

Stability Indicator/Materials to Avoid:YES
MOISTURE.
Stability Condition to Avoid:KEEP DRY.
Hazardous Decomposition Products:ZINC FUMES.

Disposal

Waste Disposal Methods:DISPOSE I/A/W LOCAL, STATE, AND FEDERAL
REGULATIONS. DO NOT INCINERATE UNOPENED CONTAINER.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.